How To Reset Rain Bird Wifi Module. Rain Bird Lnk Wifi Module Manual Download the Rain Bird Mobile App; Open the Controller Front Panel and insert the LNK2 WiFi module into the accessory slot To reset a Rain Bird WiFi module, you'll need to follow these steps: Power Cycle the Module: Unplug the power cable from the back of the module for 30 seconds to 1 minute.
Rain Bird Wifi Module LNK2 SiteOne from www.siteone.com
STEP 1: Press the Quick Pair button on the LNK WiFi Module or on the controller interface (depending on model) for one second Controller was previously set up in AP Hotspot Mode by another user and the controller interface is blinking alternating red and green, and I want to connect to my WiFi network for the first time You will need reset your.
Rain Bird Wifi Module LNK2 SiteOne
On a LNK WiFi Module, the light will change from blinking green to blinking green and red. Remove the WiFi module again and press the reset button on the controller (may require a pen), wait 3 seconds, then reinsert the WiFi module; Reset the WiFi module Use the Correct Network: Make sure your smartphone or tablet is connected to the correct WiFi network before attempting to reconnect the module.; Check for Interference: Walls, appliances, and other devices can interfere with WiFi signals.
How To Reset Rainbird Sst900in. The LED should turn Amber colored, and then red, followed by three green blinks, followed by red and green alternating (WiFi Hotspot) To reset WiFi settings back to QuickPair broadcast mode, follow the steps below
Rain Bird Lnk Wifi Module Manual. Remove the WiFi module again and press the reset button on the controller (may require a pen), wait 3 seconds, then reinsert the WiFi module; Reset the WiFi module New updates can sometimes cause unexpected behavior or conflicts with existing settings